How to start the machine for PP strapping seals

Video of how to start the machine

 

 

Steps on how to start the machine

 

 

step one

Loosen the handle of fixing roller

step two
turn the belt wheel manually
and raise the cutter up at a
uppper position that is correct now

not downward at this postion
Raise the cutter up by turning
the belt wheel in a correct direction
as shown on

the arrow
step three
put the steel strip into the machine
through the fedding rollers
and get it out from here
and all the way push intill the
position of limit block

step four

turn the belt wheel again downward
to let the cutter cut off the steel

strip
step five

tighten up the fixing rollers

step six
push on the button inching switch
and check the arrow position whether
in a correct direction or not

step seven
if it is in a correct direction
turn on the auto button for
starting the

machine successfully

 

 

+++++++++++++++++++++++++++++++++++++++

Cost analysis for investing -PP strap clip- machine

If you have a machine which can produce as fast as 90 pieces/minute for your production, that means you can produce about 40,000 to 50,000 pieces in one working day which is about 148 KG or 185 KG per day( if the size is 13x31x0.5mm galvanized steel) and if you can sell the products at a price of 0.005 USD/piece in your local market as minimum pricing, you will get a 200-250 USD output and sale per day and will get 36,000--45,000 USD output and sale in 6 months, and you will get the machine investment funds back after six months' production and sales if you have a 15% minimum profit out of production and sales at your local market ( but of course depending on sale's ability) on the condition that you get galvanized steel coil at a price of less than -1000- USD/ton.

 

 

Get a quotation now by writing few words below!

 


 


 

 

 

 

(after submit please click Anti spam box in next page ,thanks!)