114-P-STRAPPING-SEAL-SEMI-OPEN

 

 

semi open seal 16 mm

 

 

semi open for 19 mm steel seal

 

 

 

 

How to install the machine of steel -strapping clip-

1.  Connect the power supply, make sure the running direction of the belt pulley(5) same as the arrow direction on the pulley.

2.  Turn off the machine, run the machine by hand through pulley. Make the Mould(1) to the top place.

3.  Feed the raw material into the machine through the feeding rolls(8) until it in the Shearing platform(7).

4.  Do not turn on the machine! Produce 3-5 seals manually through the belt pulley. Make sure every seal can be pushed out.

5.  Fest the feeding rolls and turn on the machine. Begin the continues work.

6.  By every new feeding, repeat step 2 to 5.

7. Fixing the machine by foot steel screw

How to install the machine of steel -strapping clip-

Click here for bigger picture of machine illustrate >>>

 

Get a quotation now by writing few words below!

 


 


 

 

 

 

(after submit please click Anti spam box in next page ,thanks!)