Ratchet buckle with Double J-hook 75 mm for 10 tons

 

 

ratchet with double j hook with 75 mm width for 10 tons break force

 

Parameter	Typical Value
Webbing Width	75 mm (3 inches)
Breaking Strength (BS)	10,000 kg
Working Load Limit (LC)	5,000 daN (approximately 5,000 kg)
Safety Factor	2:1
Webbing Material	100% Polyester (PES)
Hook Type	3-inch Double J Hook

Applicable Standard

EN 12195-2

 

Key Points to Note When Writing Specifications

1. "Breaking Strength" is Not the Same as "Working Load"
The 10 tons you mentioned is the breaking strength (the force at which the strap breaks). In actual use, the working load limit (LC) is typically half of it, i.e., 5,000 daN. Some products explicitly label "working load 5000 kg, assembly breaking strength 10000 kg". For safety compliance, specifications should separately state both values.

2. Hooks and Other End Fittings
Double J hooks are a standard configuration, but it's advisable to specify "3-inch" in the specification to match the webbing width. Some products also offer alternatives such as claw hooks, which can be noted as options based on actual needs.

3. Verify Certifications
Products from reliable sources typically claim compliance with EN 12195-2, and some come with CE, TÜV/GS, or ISO certifications. When writing procurement specifications, requiring the supplier to provide test reports or certificates of conformity is recommended.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

please contact us if you need such items

WhatsApp:+86 18621323471;

wechat +86 15057987463

Whatsapp call: +853-61802153

Emal:[email protected]
Web: strap-seal-machine.com

Thanks for your attention!