How to buy the machine for making strapping seal or buckle?
Know what you need to buy | send us your photo and drawings | send you specifications| send you videos or samples | send you contract | how to pay? |
start making machine | send samples and videos for your confirming prepare for the shipping | Installing and after service |
Step 8 We ship the machine with all spare parts and molds or other items you need
After we get all the confirmation of the samples and videos and photos we sent to you, we will start have final checking of the machine
especially, if you need change the voaltage of the motor ( for example, if you need 220 V 60 Hz 3 Phase for the motor) we will double
Checking with meter ( because if 220 V, we do not have such power enviroment)
If you buy the PET strapping seal clips machine we will offer you with an important parts which is the
serrated teeth plate
After checking we will packing the machine and ship them to the port for loading into the ship
steel coil holder
If you need the steel coil holer we will make one for you which can carry 100- 150 kg of load.
We will receive the final payment of 70% before the ship leaving the port toward your country.
contact us now!
Or send your message from your apple or addroi phone
Question and Answer
If you need a steel strapping seal machine for producing your steel strapping seal using materials from steel coil or from steel scraps ( by using steel scraps strapping seal machine) it is here for your correct choice.
Is this steel strapping seal machine expensive?
No, it is not expensive.
Is the machine slow or fast?
What's the machine lifetime in case it is used daily?
Well, it is more than ten years if you use it daily.
What other parts should be changed?
it is only one part which needs a change every one or two months depending on your usage frequency, it is the part of cutting tool device which is made from Japanese SKD high-speed steel and it is ten minute work to change it which we will provide you with spare parts for your whole year usage when you newly purchase from us.
Is it easy to install?
yes, it is very easy once you fix the machine four feet by screw provided by us in less on the hour you may run the machine as soon as you plug into the electricity socket which is 360--420V/3P.
How many months shall we get back what we will have invested?
Well, if you have two or three big customers who order monthly, you will get back your funds invested in the machine in less than half a year. because it is a simple calculation that the machine value is only 3% of the value of products produced from the new machine only in half-year even under an extremely world wide slow down in the economy.so don't look down upon this tiny machine whose performance is phenomenal!
Yes, you can have the LOGO embossed easily on the bottom of the steel strapping seal because on the left side of the machine there is embossing device that enables the embossing simultaneously with the processing of seal shaping, cutting, and finishing.
Can we get a specification of the machine or manual?
How many days can we get the machine after putting order to you?
it is only 15 days after we get the downplay or from the date on which we send to you the Proform Invoice and agreed by both parties.
Can we talk to you face to face about the purchasing of the machine?
Yes, you are welcome to come to pay a visit. our selling office is at Shanghai where you may easily fly over which airport is connected with most of the major cities in the world.
Can you call you by phone about the questions we need to ask?
Yes, you add me to your Whatsapp list and we start to talk freely.
Can this machine produce 16 19 and 32 mm width of steel strapping seals in the same machine?
Yes, it can produce all the sizes of the steel strapping seal in the same machine and easy to change the seal making the device part inside in few minutes.
If you want to know more
Please send email to us
Get a quotation by writing few words below!
🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀 🍀